First, the correct operation specification of the winding machine

1, the operator of the machine should undergo the necessary training, familiar with the structure, performance, machine operation method.

2. Check the safety and reliability of power system and mechanical system by filling oil lubrication chart and requirements.

3, when opened, should check whether the rotation direction of the big gear conforms to the direction of the arrow, foot switch, confirm normal operation.

The machine must be adjusted when it is stopped.

5. When any part of the body may not touch the size of his bed in the restricted area.

6, roll material should not be cut too thick, so as not to damage the machine or blade.

7, in the process of bending work, if you have any abnormal situation, should immediately stop working, cut off the power supply, find someone to understand the reason, can continue to use after troubleshooting.

8. After work, cut off the power supply, clean the machine, guide the blade and add lubricating oil.

Two, the correct maintenance of the winding machine

1, operation in strict accordance with the operation rules.

2, before each startup according to the lubrication chart requirements of timing, fixed point, quantitative lubricating oil should be clean, no precipitation.

3, the machine must be kept clean, rust-proof oil on the unpainted part.

4, waterfront motor bearing lubricating oil should be regularly replaced inside the filling, often check whether the electrical part of the work is normal and safe.

5, regular check triangle belt, handle, knob, button damage, wear should be replaced in time, and report spare parts supplement.

6. Check repair switches, insurance and handles regularly to ensure their reliable operation.

7. Lubricate and clean the machine 10 minutes before work every day.

8, it is strictly prohibited to operate the equipment without designated personnel, usually from the machine must stop.